Solvent Recovery - ROTOmaX C Series
Fully enclosed automatic distillation unit
Fully enclosed automatic distillation unit. Just connect it to power, cooling water and compressed air: ROTOmaX-C is ready for operation! No more installation work necessary!
The ROTOmaX-C is equipped with an additional solvent container system. The unit is completely enclosed in a housing with all required pipes and connections, and wired to the control station on the outside of the housing. All components within the system are already connected when delivered, therefore no additional installation expenses are incurred. The complete unit only has to be connected to power, cooling water and compressed air. This allows the ROTOmaX-C to be installed and operated in areas not protected against explosions, making it the perfect complement for integrated printing press cleaning systems in the pressroom or for flexo plate processors in the processor room. The compact unit can be easily positioned with a forklift truck. And, once it has been connected to the power, cooling water and compressed air supplies, the ROTOmaX-C is ready for operation.
- high efficient distillation unit (15 - 30 kW, 95% recovery)
- high performing vacuum
- two 1000 l solvent containers
- integrated spill tray
- system does not require ex proof surroundings
No ex-proof surroundings necessary
♦ Can be placed easily to wherever you need it, for example next to printing presses.
It’s all in there:
♦ 2 containers for clean and dirty solvent, strong vacuum unit, pumps, pipes, level sensors. The whole system is placed on a spill tray.
Already connected when delivered, no additional installation expense
♦ Unit is completely enclosed in a housing with all necessary pipes and connections, electrical cabinet an PLC at back side.
Door with position control system
♦ Discharge area is completely closed off, automatic start of air extraction when the door is opened.
* Recovery rate depends on type of solvent and contamination